|
|
 |
Instructions
1. Identify the correct location of the cartridge on the resetter, line up the pins with the gold pads on the cartridge chip.
2. Push the cartridge and resetter together. The red LED flashes indicating that reprogramming is taking place.
3. When the LED turns green the chip has been reset.
4. If the red LED stops flashing but has not flashed green, the chip has not been reset correctly. Try again ensuring that the pins and chip are lined up correctly.
Use the adaptors to line up the gold pads with the pins on single colour cartridges.
For use with:
Epson Stylus Color
680/685/777/777i/780/790/1000ICS
Epson Stylus Photo
780/785EPX/790/810/820/830/870/870LE
875DC/875DCS/890/895/915/925/950
1270/1280/1290/2000P/2200
Epson Stylus
C41/C42/C42+/C42UX/C42SX/C48/C50/C60/C61
C62/C63/C64/C70/C70+/C80/C82/C83/C84/C86
CX3200/CX3600/CX3650/CX5100/CX5200/CX6300/CX6400
R200/R220/R240/R300/R320/R340/R520/RX420/RX425
RX500/RX600/RX620/R800/R1800
D68/D88/DX4800/DX4850 |
 |
|
|
BluePink 
